Operations On Luminaires; Selective Switching-On Of Luminaires - Zemper PZD-250 Manual Del Usuario

Operations on luminaires

To make operations on a luminaire, and without any incidence of these operations on the other luminaires of the zone
where this one is installed, follow these steps:
Connect the programmer to the zone (with installed luminaires) where the luminaire we want to operate on is

installed (see "Connection of the PZD250 programmer to several luminaires").
From the "MAIN MENU", with the scroll buttons, select "LUMINARY".

Press "OK" to confirm the selected option.

The following screen appears:

SELECTION
Press "ANUL." to return to the main screen "MAIN MENU".

Once you are in this screen, you can do the following operations on the luminaire or group of luminaires:

Selective switching-on of luminaires.


Selective switching-off of luminaires.

Aborting test in progress of one or several luminaires.

Selective reset of luminaires.

Selective recognition of luminaires

Change of number of a luminiare..

Selective switching-on of luminaires.
To switch-on a luminaire, follow these steps:
Connect the programmer to the zone (with installed luminaires) where the luminaire we want to operate on is

installed:
From the screen "LUMINARY MENU" "OPERATION IN LUMINARY" (see "Operations on luminaires") with

the scroll buttons select "TURN ON".
Press "OK" to confirm the selected option.

The following screen appears:

Enter the number of the luminaire you want to switch-on (three digits), from 001 to 125.

Press "OK" to confirm the number entered. At this moment, the programmer switches-on the selected

luminaire.
If the operation has been correctly carried out, the LED ERR will be off. If the operation is not correctly carried

out, this LED ERR will be ON.
Once the luminaire is switched-on, you can follow switching-on other luminaires.

Press "ANUL." to return to the main screen "OPERATION IN LUMINARY".

The switching-on operation can be run on both lights that are connected to mains supply and those that are not.
LUMINARY MENU
OPERATION IN LUMINARY
TURN ON
TURN OFF
RESET
MONITORING TEST
NUMERATION
LUMINARY MENU
TURN ON LUMINARY
---
37