Zemper PZD-250 Manual Del Usuario página 34

Consulting the luminaires saved in memory.
To consult the list of the luminaires saved in the different "ZONES", follow these steps:
From the "MAIN MENU", with the scroll buttons, select "STATUS".

Press "OK" to confirm the selected option.

The following screen appears ("SCREEN 1"):

SELECTION
Press "ANUL." to get out to the main screen "MAIN MENU".

Or, with the scroll buttons, select the memory address ("ZONE") where you want to consult the information

saved.
Press "OK" to confirm the selected option.

The following screen appears ("SCREEN 2"):

SELECTION
With the scroll buttons, select "LUMINARIES"

Press "OK" to confirm the selected option.

The following screen appears ("SCREEN 3"):

The following information appears on the screen:

Press "ANUL" to get out of this screen and return to the SCREEN 2.

Press "ANUL" to get out of the SCREEN 2 and return to the SCREEN 1.

Press "ANUL" to get out of the SCREEN 1 and return to the main screen "MAIN MENU".

STATUS MENU
Set Zone:
ZONE 1
ZONE 2
ZONE 3
ZONE 4
STATUS MENU
ZONE X STATUS
LUMINARIES
ERRORS
DELETE ZONE
LUMINARIES
1
ZONE x
TOTAL LUMINARIES: 005
001 005 006 025 138
3
1/ Memory ONE elected
2/ Quantity of luminaires recognised and saved in the selected memory.
3/ List of Luminaires. The numbers of the luminaires are shown, in ascending order.
4/ Indicates that the information relative to the numbers has more lines than the shown on the screen.
To see the hidden lines (up or down of the screen), you will use the scroll buttons.
ZONE 5
ZONE 6
ZONE 7
ZONE 8
34
SCREEN 1
SCREEN 2
2
SCREEN 3
4