Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
General switching-on of luminaires.
To switch-on all the luminaires connected to the programmer, follow these steps:
From the "MAIN MENU", with the scroll buttons, select "MAIN ON".
Press "OK" to confirm the selected option.
Automatically, all the luminaires connected to the programmer will switch-on (Emergency mode). This
function is equivalent to the Switching-on function of a general remote control.
This operation will be carried out on both luminaires that are connected to mains supply and those that are
not.
This operation may last between 1 and 5 seconds.
Once the operation has been carried out, the programmer returns to the main screen "MAIN MENU".
General switching-off of the luminaires.
To switch-off all the luminaires connected to the programmer, follow these steps:
From the "MAIN MENU", with the scroll buttons, select "MAIN OFF".
Press "OK" to confirm the selected option.
Automatically, all the luminaires connected to the programmer will pass to Standby or rest mode. This
function is equivalent to the Switching-off function of a general remote control.
This operation will be carried out on both luminaires that are connected to mains supply and those that are
not.
This operation may last between 1 and 5 seconds.
If you send a general switching-off and there are luminaire making a test at this time (duration or emergency
lamp test), these tests will abort, and the luminaires will return to the status there were before starting the test.
Once the operation has been carried out, the programmer returns to the main screen "MAIN MENU".
General reset of luminaires.
To proceed to a general reset of all the luminaires connected to the programmer, follow these steps:
From the "MAIN MENU", with the scroll buttons, select "MAIN RESET"
Press "OK" to confirm the selected option
Automatically, all the luminaires connected to the programmer will be reseted.
This operation will be carried out on both luminaires that are connected to mains supply and those that are not
This operation may last between 30 and 60 seconds.
Once the operation has been carried out, the programmer returns to the main screen "MAIN MENU".
Once you have launched a reset operation, the luminaires will react in the following way:
If the luminaire is connected to mains supply, in alert mode and without failures : the luminaire does nothing.
If the luminaire is connected to mains supply, in alert mode and with failures registered: the registered
emergency lamp and duration failures of the luminaire will be deleted.
If the luminaire is connected to mains supply, carrying out a test : the test is aborted and the registered
emergency lamp and duration failures of the luminaire will be deleted.
If the luminaire is connected to mains supply and is on : the luminaire turns off and the registered emergency
lamp and duration failures of the luminaire will be deleted.
If the luminaire is not connected to mains supply, and is in emergency mode : the luminaire gets into standby
mode and the registered emergency lamp and duration failures of the luminaire will be deleted.
If the luminaire is not connected to mains supply, and is in standby mode: the luminaire remains in standby
mode and the registered emergency lamp and duration failures of the luminaire will be deleted.
31
Publicidad
Capítulos
Tabla de contenido
