Zemper PZD-250 Manual Del Usuario página 36

DURATION : The duration of the luminaire is inferior to the assigned one. To correct this failure, change the

battery of the luminaire. The failure will be corrected only when the luminaire proceeds a complete duration
test and this one is correct (with control unit TPT8250).
Before changing the battery, it's convenient to launch a duration test in order to be sure that the luminaire
really has a battery failure (with control unit TPT8250). If the failure remains after the duration test, change the
battery.
Deletion of the information saved in memory.
To delete the information saved in the different "ZONES", follow these steps:
From the "INITIAL MENU", with the scroll buttons, select "STATUS"

Press "OK" to confirm the selected option.

The following screen appears ("SCREEN 1"):

SELECTION
With the scroll buttons, select the memory address ("ZONE") you want to delete the information saved.

Press "OK" to confirm the selected option.

The following screen appears ("SCREEN 2"):

SELECTION
With the scroll buttons, select "DELETE ZONE"

Press "OK" to confirm the selected option.

The information of the selected "ZONE" has been deleted.

The SCREEN 1 appears.

Press "ANUL." to get out of the SCREEN 1 and return to the main screen "MAIN MENU".

STATUS MENU
Set Zone:
ZONE 1 ZONE 5
ZONE 2 ZONE 6
ZONE 3 ZONE 7
ZONE 4 ZONE 8
STATUS MENU
ZONE X STATUS
LUMINARIES
ERRORS
DELETE ZONE
36
SCREEN 1
SCREEN 2