Recognition Of The Luminaires With The Pzd 250 Programmer - Zemper PZD-250 Manual Del Usuario

Recognition of the luminaires with the PZD 250 programmer.

To recognise the luminaires that are connected to the programmer, follow these steps:
Connect the programmer to the zone (with luminaires installed), or to the luminaire you want to recognise

(see "Connection of the PZD250 Programmer to several luminaires).
From the "MAIN MENU", with the scroll buttons, select "MONITORING TEST".

Press "OK" to confirm the selected option.

The following screen appears:

During the recognition, squares appear on the screen (RECOGNITION IN PROGRESS).

Each square represents a luminaire (up to 250 squares).

The black squares represent luminaires that have been recognised and the white squares, those that have

not been recognised.
Press "ANUL." once the recognition of the 250 luminaires is finished.

The following screen appears:

Press "ANUL." to get out to the main screen "MAIN MENU". The recognised luminaires will not be saved in the

memoy.
Or press "OK" to save the recognised luminaires.

The following screen appears:

SELECTION
The PZD 250 programmer is provided of 8 memories (ZONES) that allow to save the luminaires recognised in

8 zones.
Press "ANUL." to get out to the main screen "MAIN MENU". The recognised luminaires will not be saved in the

memoy.
Or, with the scroll buttons, select the address of memory ("ZONE") where you want to memorise the

information of the recognised luminaires.
Press "OK" to confirm the selected option.

If the selected "ZONE" is empty, the information is saved and the screen returns to the "MAIN MENU". The

numbers of the luminaires recognised and their possible failures are saved.
If the selected "ZONE" already has some information saved, the following message appears on the screen :

"The Zone nº X has information already saved : do you want to overwrite?
If you press "ANUL." you return to the previous screen.

If you press "OK", the luminaires recognised will be saved in the selected "ZONE" and the sreen will return to

the "MAIN MENU". The numbers of the luminaires and the possible failures they may have will be saved.
MONITORING TEST
MONITORING TEST
Save the monitored
number?
MONITORING TEST
MEMORY ZONE
ZONE 1 ZONE 5
ZONE 2 ZONE 6
ZONE 3 ZONE 7
ZONE 4 ZONE 8
33
RECOGNITION
IN PROGRESS