Dynamic/Animal Weighing - Uline OHAUS EXPLORER H-4737 Manual Del Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

3. Press DONE to begin check weighing.

4. To use check weighing, touch EDIT SETTINGS to set the

nominal, and upper and lower tolerance values

(in weight).

5. Press RETURN TO APPLICATION when settings are

complete.

CHECK WEIGHING – NOMINAL/PERCENT TOLERANCE MODE

With this feature you can establish a target or nominal

weight value and pre-set tolerance in percent.

1. To enable this feature, enter the setup menu.

2. Change the mode to Nominal, % Tolerance. The

Check Weighing options screen returns. Press DONE

to begin check weighing.

3. To use this mode, touch EDIT SETTINGS to set the target

weight, and upper and lower tolerance values.

4. Press RETURN TO APPLICATION when settings are

complete.

PAGE 13 OF 96

OPERATION CONTINUED

Use this application to weigh an unstable load, such as

a moving animal. Three different start/reset modes can

be selected: manual (start and stop via key press), semi-

automatic (auto-start with manual reset), and automatic

(start and stop automatically).

EDIT SETTINGS

To view or adjust the current settings, touch the EDIT

SETTINGS button. The Application Settings screen appears:

• Settings available: Averaging Time

• Functions available: Return to Application

1. The Averaging Time can be set from 1 to 99 seconds.

2. The default value is 10. To change it, press the

3. A numeric input window is displayed. Key in the

4. The display returns to the previous screen with the new