Additional Instructions - Össur Philadelphia Instrucciones De Uso

ENGLISH
MEASUREMENT & SIZING
Proper sizing is important for patient immobilization and comfort. Always
maintain the patient's head in neutral alignment.
Height:
Measure the vertical distance from the top of the patient's shoulder to the
tip of the chin (Figure A).The measurement corresponds to the height of
the collar. If the patient's measurement falls between two consecutive
sizes, apply the smaller size first.
Circumference:
Measure around the patient's neck (Figure B).The measurement
corresponds to the size circumference of the collar.
APPLICATION
Proper application of the collar is as important as proper sizing for
immobilization and patient comfort. The two-piece design consists of a
front piece and a back piece which are packaged as a set.
1. After selecting the properly sized collar, apply the back piece of the
collar to the back of the patient's neck. Center the collar. The back
arrow should point upward.
2. Apply the front piece of the collar with the chin secured in the
recess. Center the collar to secure neutral alignment. The front
piece overlaps the back piece to ensure effective immobilization
and comfort. The front arrow should point upward.
3. With hook and loop fasteners, tighten the collar with a bilateral
adjustment. This will secure the patient's cervical region in neutral
alignment.
FEATURES
®
Non-toxic Plastazote
Total Cervical Arch Support
Full range of sizes for custom fit
X-Ray Lucent
Easily cleaned with soap and water
Hook and loop fastener
Use as prescribed by a physician

ADDITIONAL INSTRUCTIONS

If you experience sudden neck or back pain, numbness or tingling,
contact your doctor.
If you have any problems or questions about the use and care of your
brace, contact your doctor or orthotic professional.
These instructions do not supercede the specific orders of your
physician.
Foam
5