Power Source; Technical Characteristics, After Sales Service - Micro-Mega MM control Iinstrucciones De Empleo

Manufacturer
Model
EN 60601-1 classification
93/42 CEE classification

Power source

Contra angle (25g)
Electrodes and contra angle
Length of leads:
Control box
Weight / Dimensions in mm
(HxLxD)
Operating conditions
Storage and transport conditions
After Sales Service
For all maintenance or repairs, send your appliance to your distributor or directly to the MICRO-MEGA SA Service depart-
ment (our address is on www.micro-mega.com). For a return under warranty please attach a copy of your invoice; this will
help your request to be handled more quickly.
Before dispatching your equipment, clean, disinfect and sterilise it as explained in the user instructions.
Wrap your appliance carefully before dispatching it; we cannot accept responsibility in the event of damage during
transport.
•
For your appliance to receive a complete overhaul, please send the contra angle, the measurement leads, the file grip
and the charger as well.
Technical characteristics
MICRO-MEGA SA, 25000 Besançon - France
MM.control - On the market in 2014
Class B, Applied part of the BF, IP 30 type
Class IIa
3.6 Volt 900 mAh rechargeable battery pack
300 to 500 charge and discharge cycles
Battery charger: 9 Volts 0.66 A
For used batteries: Please dispose of these through the
waste recycling scheme applicable in your country.
Maximum rotation speed: 600 rpm
Diameter of tools 2.35 - type 1
Special coupling for MM.control
Autoclavable at 135° C
Micro motor: 1.5 metres
Measurement: 1.5 metres (Autoclavable at 135° C )
Made from white ABS with integral hand part rest
425gm / 97 x 186 x 80
10°C to + 35°C
30% to 75% relative humidity
-10°C to + 40°C
30% to 95% relative humidity
199