Installing The Flame Broiler Adjuster Bar; Attaching The Flame Broiler Adjuster Bar Handle; Installing The Cooking Components - Pit Boss PLATINUM KC COMBO PB1285KC Manual De Instrucciones

19. INSTALLING THE FLAME BROILER ADJUSTING BAR
Parts Required:
1 x Flame Broiler Adjusting Bar (#30)
Installation:
• Put Flame Broiler Adjusting Bar into the chamber of the pellet grill and
push the Flame Broiler Adjusting Bar (To Flame Broiler Adjusting Bar handle
Side) pass through the chamber of pellet grill (shown as Step 19).
20. ATTACHING THE FLAME BROILER ADJUSTING BAR HANDLE
Parts Required:
1 x Flame Broiler Adjusting Bar handle (#31)
Installation:
• Mount Flame Broiler Adjusting Bar handle to the Flame Broiler Adjusting Bar.
• Open the locker on the Flame Broiler Slider
• Put the Flame Broiler Adjusting Bar in the position.
• Close the locker on the Flame Broiler Slider.

21. INSTALLING THE COOKING COMPONENTS

Parts Required:
2 x Porcelain-Coated Cast-Iron Cooking Grids (#2)
1 x Warming Rack (#1)
Installation:
• Put the Porcelain-Coated Cast-Iron Cooking Grid in to chamber of Pellet Grill.
• Put Warming Rack in to chamber of Pellet Grill.
• Close the lid of Pellet Grill.
IMPORTANT: To maintain optimal searing and grilling performance of
your cooking grids, regular care and maintenance is required.
14
19
30
20
31
21
3
1
1
2
2
1
2
3