TEFAL PF220838 Instrucciones De Uso página 65

TECHNICAL TROUBLESHOOTING GUIDE
PROBLEMS
The kneading
EN
paddle is stuck in
the pan.
After pressing on ,
nothing happens.
After pressing on
, the motor is on but
no kneading takes
place.
After a delayed
start, the bread has
not risen enough or
nothing happens.
Burnt smell.
Let it soak before removing it.
EO1 is displayed and flashes on the screen, the appliance beeps:
the appliance is too hot. Wait 1 hour between 2 cycles.
EOO is displayed and flashes on the screen, the appliance beeps:
the appliance is too cold. Wait for it to reach room temperature.
HHH or EEE is displayed and flashes on the screen, the appliance
beeps: malfunction. The machine must be serviced by authorised
personnel.
A delayed start has been programmed.
The pan has not been correctly inserted.
Kneading paddle missing or not installed properly.
In the two cases cited above, stop the appliance manually with
a long press on the
beginning.
You forgot to press on
programme.
The yeast has come into contact with salt and/or water.
Kneading paddle missing.
Some of the ingredients have fallen outside the pan: unplug the
appliance, let it cool down, then clean the inside with a damp
sponge and without any cleaning product.
The preparation has overflowed: the quantity of ingredients
used is too great, notably liquid. Follow the proportions given in
the recipe.
121
CAUSES - SOLUTIONS
button. Start the recipe again from the
after programming the delayed start