Gima RS01 Manual De Usuario página 66

Plug the SpO probe into USB interface, as Figure 4-3-2-4.
2
1) Connect the probe with the device.
2) Put the finger into the probe.
3) In measurement interface,you can directly read corresponding data from dis-
play screen.
Warning: Use the SpO
probes are forbidden.
Notes:
 Testee's fingernail shall not too long.
 Testee shall not use enamel or other makeup.
 The finger too cold or too thin may affect the measurement; when measuring,
please insert the thicker finger fully into the probe (thumb or middle finger rec-
ommended).
 In operation, the finger tested shall not tingle and the testee shall not be in
movement.
 When inserting the finger, fingernail and the luminescent tube should be on the
same side
ENGLISH
Figure 4-3-2-3 Binding SpO
Figure 4-3-2-4 Placing SpO
probe specified by our company,and other SpO
2
probe
2
probe
2
18
2