Apéndice - Nice For-Max Video Screen Instrucciones Y Advertencias Para La Instalación Y El Uso

EN - Appendix
IT - Appendice
FR - Appendice
ES - Apéndice
DE - Anhang
PL - Załącznik
NL
7
I
- Bijlage
EN - Disposal of the product
This product is an integral part of the automation and therefore must be
demolished with it.
As for installation, the plant must also be demolished by qualified staff at the
end of its life span.
This product is made up of various types of materials: some can be re-cycled,
others must be disposed of. Obtain information regarding recycling or disposal
systems envisioned by the Standards in force on your territory for this category
of product.
Attention! – some parts of the product can contain pollutant or dangerous
substances which, if dispersed into the environment, could have damaging
effects on the same and human health.
As indicated by fig. 7, it is prohibited to throw this product into domestic waste.
"Separate collection" must be performed for disposal, according to the me -
thods envisioned by the Regulations in force on your territory or take the prod-
uct back to your dealer on the purchase of a new equivalent product.
Attention! – local regulations in force may envision heavy sanctions if this prod-
uct is disposed of abusively.
EN - Caratteristiche tecniche del prodotto
u Power supply voltage and frequency, Current and electric power,
Torque and speed: See the technical data on the label attached to each
model
u Diameter of the motor casing: 45 mm
u Maximum admissible torque: 5 / 8 / 15 / 30 Nm
u Safety equipment: it is equipped with a thermal protection device. In the
event of overheating due to excessive use of the automation, it automatical-
ly cuts off the electricity and restores it as soon as the temperature returns
to normal.
u Limit switch technology: electronic control of movement by means of
encoder
u Precision (resolution) of the electronic limit switch: over 2.67°
u Precision of the limit position stops: ±5 % (Class 2), in accordance with
standard EN 14202
u Mechanical resistance: in accordance with standard EN 14202
u Continuous operating time: Maximum 4 minutes
u Protection rating: IP 44
u Power supply cable length: 2.5 m
u Frequency of the built-in radio receiver: 433.92 MHz
u Encoding type of built-in radio receiver: 52 Bit rolling code "FloR" and "TTS".
Compatible with all Nice control electronics using the NRC radio system.
u Number of transmitters that can be memorized: 30
u Range of ERGO, PLANO and NICEWAY transmitters: 150 m in free field;
20 m inside buildings (*)
u Manoeuvres available: Total UP, Total DOWN, Stop of manoeuvre in
progress, automatic stop at partial position (max. 30 partial positions, to be
memorised and recalled on a second transmitter)
u Programming: via radio, using a hand-held transmitter; some settings can
also be programmed via cable, using a wall-mounted pushbutton panel with
2 buttons (optional accessories not supplied in pack)
Notes:
- (*) The range of the transmitters can be influenced by other devices operating
in the vicinity at the same frequency as the transmitter (for example radio
headphones, alarm systems, etc.), causing interference with the receiver. In
the event of interference, Nice cannot guarantee the effective capacity of its
radio devices.
- All technical specifications stated in this section refer to an ambient tempera-
ture of 20°C (± 5°C).
- Nice S.p.a. reserves the right to apply modifications to products at any time
when deemed necessary, maintaining the same intended use and functionality.