Motor Connection - BONFIGLIOLI Vectron Agile Manual Del Usuario

C

Motor connection

Danger!
Switch off power supply.

Dangerous voltage: The power terminals may carry dangerous voltages for some time

even if the power supply is switched off. Wait for several minutes before starting to work
on the frequency inverter.
Make sure that the frequency inverter is de- energized.

Ground the motor- side grounding terminal.

Connect the motor.

Cables must be as short as possible.

Comply with the data of the motor type plate for star or delta connection.

Connect the conductor shielding to ground of the motor cable to ground potential by

means of shielding clamp.
Connected the conductor shielding to ground potential on both sides (near to the fre-

quency inverter and near to the motor).
X2
U V W
Rb1 Rb2
U V W
M
3
05/2019
X2
U V W
Rb1 Rb2
Motor cable shielding
U V W
M
3
37
0.5 Nm
Rb1, Rb2:
Only required for
braking resistor con-
nection.
Quick Start Guide
Agile