Integra Codman CereLink Manual Del Usuario página 23

SETUP FOR CLINICAL USE
Return to the Codman CereLink ICP Monitor and press the arrow to continue the synchronization process (see Figure 21).
4
Figure 21: External Patient Monitor Setup – Arrow to Continue
Use the available calibration signals (0, 20 and 100mmHg) on the ICP Monitor to confirm the correct calibration and scaling of
5
the External Bedside Monitor.
Figure 22: External Patient Monitor Setup – Calibration Signal
Refer to the Instructions for Use of the External Bedside Monitor to optimize the calibration.
23
EN - ENGLISH