Peltor Lite-Com III Manual De Instrucciones página 6

PELTOR Lite-Com III
Wireless communications headset
The Peltor Lite-Com III offers reliable and effective wireless communication between two or
more people, even in noisy environments. The Peltor Lite-Com III is distinguished by its user-
friendliness and the safety and increased comfort offered by the active-volume function that
attenuates loud ambient noise to a harmless level. Read these operating instructions carefully
to get the most out of your Peltor product.
FEATURES
• Wireless Communications Headset LPD with 69 channels. With an output of 10 mW, it
has an outdoor range of more than one kilometre under normal conditions.
PMR with 8 channels. With outputs of 25/150 mW, it has an outdoor range of more than
two kilometres under normal conditions.
• Active hearing protection with stereo reproduction of ambient sounds and noise level
limiting to protect against harmful noise.
• The Lite-Com radio and ambient sounds can be listened to simultaneously.
• Can also be used as a headset for external equipment connected to the auxiliary jack.
• Automatic shut-off two hours after last transmission, reception, or button activation.
Repeated voice messages for five minutes when battery power is low. Then the
Lite-Com III switches off.
• Reverse polarity protection prevents damage to the electronics if battery is turned the
wrong way.
• The selected settings are confirmed by a voice message or tone signal and are presented
on the LCD display. The last settings selected are saved when unit is shut off.
ADVANTAGES
H:1 Extra wide headband (MT53H7A****) with soft padding for maximum comfort through-
out the workday. Fitted helmet attachments (MT53P3E****) with attachments for visors
and rain shields.
H:2 Independently flexible headband wires made of stainless spring steel provide even
distribution of pressure around the ears. Steel headband wires retain their flexibility
better than plastic headbands across a wide range of temperatures.
H:3 Low, two-point suspension and simple height adjustment with no protruding parts.
H:4 Soft and wide foam/fluid-filled ear cushions with built-in pressure equalizing vents
that provide low pressure, an effective seal and individual comfort.
H:5 Flexible antenna with low mounting and high reception sensitivity.
H:6 Auxiliary jack for connecting external equipment such as another com radio, mobile
phone, or personal stereo.
H:7 Battery compartment cover makes changing batteries easy. (Two alkaline 1.5 V type
AA batteries are included)
H:8 Microphones that capture and reproduce ambient sounds at a harmless level.
H:9 Noise-compensated speech microphone for optimum speech intelligibility and "Quick
Positioning" for smooth and easy positioning.
H:10 Push-buttons allow for simple and convenient adjustments of the Lite-Com III.
CONTROL PANEL/PUSH-BUTTONS
A:1 ON/OFF Switches the Lite-Com III on and off.
A:2 UP (+) Increases level of selected function.
DOWN (–) Decreases level of selected function.
A:3 MODE Function key for selecting between menu functions. The selected function is
displayed on the LCD and confirmed by a voice message.
A:4 SET Selection and storage of four quick choice settings.
A:5 PTT Speech button for transmitting with the Lite-Com III.
A:6 PTT AUX Speech button for control of externally connected equipment.
DISPLAY
When the unit is switched on with the ON/OFF button, the selected settings, sound level and
battery indicator are displayed.
(Fig. B). When settings are changed, the changes are displayed for 10 seconds after the
last button activation.
B:1 SUR Ambient sounds
B:2 VOL
Communications radio
B:3 CH Channel
B:4 VOX Voice controlled transmission
B:5 SQ
Hiss reduction
B:6 SUB Tone selective transmission and reception
B:7 PWR Transmitter output
B:8 Level indicator Scale that indicates current setting for respective functions. Dashed
line = 0 (Off)
B:9 Battery indicator Scale that indicates current battery voltage
B:10 Channel Indicates current channel (or sub-channel while tuning).
B:11 Sub-channel Indicates that tone selective transmission and reception is
activated
B:12 M1–M4 Indicates selected quick choice setting
INSTRUCTIONS FOR USE
ON/OFF
Switch the Lite-Com III on or off by pressing and holding ON/OFF for about two seconds. A
tone confirms that the Lite-Com III has been switched on or off.
SURROUND (Volume of ambient sounds)
When the Lite-Com III is used as an active listening hearing protector, the ambient sound
volume is controlled with the UP (+) or DOWN (–) level selectors. Adjustments are confirmed
by a voice message and displayed on the LCD. Ambient sounds can also be switched off
completely by adjusting the volume to the lowest setting with the DOWN (–) button and holding
it in for two seconds. A tone indicates that the ambient sound is switched off.
WARNING! This setting means that the ambient sound coming through the hearing protector is
reduced and may not be detectable. To reactivate the ambient sound, press UP (+) and the Lite-
Com III will again function as an active listening hearing protector with a noise level limiting.
3