Spare Parts And Accessories - Peltor Lite-Com III Manual De Instrucciones

SPARE PARTS AND ACCESSORIES

Hygiene Kit HY79
Easy to replace hygiene kit that includes two attenuation cushions, two foam rings and snap-
in ear cushions. Replace at least twice per year to insure a constant level of attenuation,
hygiene and comfort.
Clean – Single-use protector HY100
Single-use protectors that fit easily onto the ear cushions. Packages of 100 pairs.
Mike Protector – microphone protector HYM1000
Moisture, wind and hygiene protector that effectively protects the speech microphone and
increases service life.
Packages of 5 meters, about 50 replacements.
Wind protector for speech microphone M995
Effective protection against wind hiss. Increases service life and protects the speech
microphone. One per package.
Wind protector for ambient microphones M60/2
Effective protection against wind hiss. One pair per package.
Battery compartment cover 1173 SV
Battery compartment cover made of impact resistant polypropylene plastic.
Accumulator battery ACK03
NiMH accumulator that can replace two standard 1.5 V type AA batteries in most Peltor
products.
Battery charger FR03EU, FR03GB
Charger for Peltor NiMH accumulator ACK03.
Connector cords for external communication equipment
FL6BR
Connector cord with Peltor's J11 (Nexus TP-120-type) contact for use with Peltor's
FL5000-series adapters.
Can also be used for Peltor's rally intercom, service intercom, etc.
FL6BS
Connector cord with 2-pole 2.5-mm contact. For listening to the com radio.
When transmitting or receiving with your Lite-Com radio, incoming signals from the
external input are not attenuated.
FL6BT
Connector cord with 2-pole 3.5-mm mono contact. For listening to the com radio.
When transmitting or receiving with your Lite-Com radio, incoming signals from the
external input are not attenuated.
FL6CS
Connector cord with a 3-pole 2.5-mm contact for use with DECT and mobile telephones.
FL6CT
Connector cord with 3-pole 3.5-mm mono contact. For listening to the Peltor Workstyle
environment radio, Walkman etc.
When transmitting or receiving with your Lite-Com radio, incoming signals from the
external input are attenuated.
Cables for connection to communication radio
Contact your Peltor dealer for information.
7