Assembly; Unpacking - Dirt Devil AQUA Clean M318 Manual De Instrucciones

2 Assembly

2.1 Unpacking

2 Assembly
2.2 Assembly
2
3
40
1. Unpack the appliance and all its accessories.
2. Check the contents for completeness and possible
damage. Information regarding scope of delivery
Page 30, "Overview".
ATTENTION:
Always transport/send the appliance in its original pack-
aging to avoid transport damage. Keep the packaging for
such an event. Dispose of no longer needed packaging
material according to the applicable regulations of your
country.
NOTE:
Immediately contact your dealer if you have found dam-
age resulting from transport.
1. Screw the pre-installed cross-head screw out of the
adapter of the central console using a screwdriver
(Fig. 2).
2. Place the steam base on a flat surface.
3. Push the central console powerfully into the adapter on
the steam base as far as it will go.
NOTE:
The hole in the adapter must be visible through the hole
of the central console (Fig. 3). Otherwise, it will not be
possible for the screw to engage fully.