Filling The Cleaning Agent Tank - Dirt Devil AQUA Clean M318 Manual De Instrucciones

Mopa de vapor
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 108
4 If you use cleaning agents

4.2 Filling the cleaning agent tank

13
14
Cleaning
agent
15
WARNING:
Health hazard for your children! Always make sure you
store the cleaning agent in a place that is inaccessible to
children, particularly after filling the cleaning agent tank
and before steam cleaning.
NOTE:
If you do not have any cleaning agent available, simply
leave the cleaning agent tank empty. In this case, set the
cleaning agent regulator (Fig. 1/19) to 'OFF'.
1. Put the appliance into the neutral position,
5.6, "Putting the device into the neutral position".
2. Hold the appliance firmly by the carrying handle and pull
the cleaning agent tank up and out of the console
(Fig. 13).
3. Twist the tank cap anti-clockwise and take it completely
off the cleaning agent tank (Fig. 14).
4. Pour in the undiluted cleaning agent carefully into the
cleaning agent tank no higher than just under the filling
nozzle.
NOTE:
If the optional refilling container (Fig. 1/20*) is included in
the scope of delivery, use it to safely fill the tank with
cleaning agent. When the cleaning agent tank is empty,
the content of a refilling container filled to the MAX mark
fits into the cleaning agent tank.
5. Screw the tank lid back on fully (Fig. 14).
6. Push the cleaning agent tank powerfully back into the
console (Fig. 15).
Chapter
45

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido