Enerpac GT Serie Hoja De Instrucciones página 11

Tensores hidráulicos
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
7.4 De-tensioning Instructions - 50% Coverage
(tensioner installed on every other stud)
IMPORTANT: Read precautions and instructions at beginning of
Section 7.0 before beginning the following steps. Also refer to
safety information contained in sections 2.1 and 2.2.
1.
Assemble the tensioner(s) to the fi rst 50% of stud(s) to be
de-tensioned and connect the hydraulic hoses. Refer to
sections 6.1 and 6.2 for additional tensioner installation and
hose connection instructions.
2.
Follow steps 2 through 8 of Section 7.3 for the fi rst 50% of
studs.
3.
Move the tensioners to the second 50% of studs.
4.
Follow steps 2 through 9 of Section 7.3 for the remaining
50% of studs. Note that the "break loose" hydraulic pressure
for the second set of studs will likely be about the same or
slightly lower than that for the fi rst set.
Maximum
Series
Pressure
psi
bar
GT1
21,750
1500
GT2
21,750
1500
GT3
21,750
1500
GT4
21,750
1500
GT5
21,750
1500
GT6
21,750
1500
Table 2, Technical Data, Enerpac GT Series Hydraulic Tensioners
Max Load
lbf
klbf
kN
50,414
50,4
224
90,256
90,2
402
172,847
172,8
769
329,780
329,7
1467
508,374
508,3
2262
639,598
639,5
2846
8.0 STORAGE
• The tensioner's black oxide fi nish will help protect it from rust
and corrosion. However, for added protection, a light coating of
oil or rust inhibitor should be applied to all metal surfaces.
• Cover the internal threads of the threaded puller with oil or a
suitable rust inhibitor.
• Store the tensioner upright, with the piston fully retracted
inside the body.
• Always keep dust caps installed on couplers when the tensioner
is not being used.
• Wipe all hoses clean and apply a light coating of oil or suitable
rust inhibitor to all couplers.
Hydraulic
Maximum Stroke
Effective Area
2
2
inch
mm
inch
2.32
1496
0.39
4.15
2677
0.39
7.95
5127
0.39
15.16
9782
0.39
23.37
15079
0.39
29.41
18972
0.39
11
Weight
mm
lbs.
Kg
10,0
9.7-11.1
4,2-4,8
10,0
14.5-23.1
6,3-7,0
10,0
26.3-29.9
11,4-13,0
10,0
47.2-53.4
20,5-23,2
10,0
73.9-84.5
32,1-36,7
10,0
103.1-115.7
44,8-50,3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Gt1Gt2Gt3Gt4Gt5Gt6

Tabla de contenido