Changing Default Settings - melitta CAFFEO BARISTA T Manual Del Usuario

Permanently changing beverage settings
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the Direct keys > Espresso > Recipes menu.
3. Use the arrow buttons to select Ristretto and confirm with
"menu/ok".
4. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
» When an espresso is next prepared, the ristretto recipe will be used.
6.2

Changing default settings

You can change the following default settings depending on beverage:
ū Coffee amount: in millilitres,
ū Froth amount: in millilitres,
ū Milk amount: in millilitres,
ū Hot water amount: in millilitres,
ū Coffee strength: very mild, mild, normal, strong, very strong,
ū Temperature: low, normal, high.
Information
The default settings remain valid until they are changed again.
Changing the beverage settings is similar for all beverages. Changing the
coffee strength for an espresso is described here as an example.
Direct keys
Espresso
Coffee strength
Strong
Confirm with OK:
Fig. 17: Setting the coffee strength
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the Direct keys > Espresso > Coffee strength menu.
3. Use the arrow buttons to select the desired coffee strength and confirm
with "menu/ok".
28