Preparing Beverages With Personal Settings - melitta CAFFEO BARISTA T Manual Del Usuario

5. Use the arrow buttons to select an amount and confirm with "menu/ok"
6. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
» The next time a cappuccino is prepared by the user, the selected coffee
amount is used.
7.3

Preparing beverages with personal settings

The preparation of beverages using the "My Coffee" function is similar
for all beverages. The preparation of a cappuccino is described here as an
example.
Requirement: The ready symbol appears on the display and milk is con-
nected.
1. Place a vessel beneath the outlet.
2. Press the "My Coffee" button until the desired user is shown on the
display.
3. Press the "Cappuccino" button.
» The grinding process and coffee dispensing start.
» Coffee dispensing is ended automatically.
» Milk dispensing begins.
» Beverage dispensing is ended automatically.
4. Remove the vessel.
» Easy Cleaning? (OK for start) appears in the display.
5. You can execute the Easy Cleaning programme or prepare further bev-
erages.
a) Execute the Easy Cleaning programme. Follow the instructions on the
display. Information on this is available in chapter 9.4 "Easy Cleaning"
programme on page 39.
b) Prepare further beverages.
» The ready symbol appears on the display.
Information
ū To exit the "My Coffee" function, press the "My Coffee" button until the
ready symbol appears.
ū If you do not prepare a beverage within 3 minutes, the appliance auto-
matically switches to the ready symbol.
Personal settings – "My Coffee"
31