Pegasolift W12 Guia Uso Y La Mantenimento página 165

MANUTENZIONE E ISPEZIONE CHECKLIST MANUTENZIONE E ISPEZIONE CHECKLIST
HYDRAULIC OPERATION HYDRAULIC OPERATION
Test the hydraulic system. Test the hydraulic system.
Check hydraulic oil level and top up if necessary. Check hydraulic oil level and top up if necessary.
Replace the hydraulic oil after 2000 service hours . Replace the hydraulic oil after 2000 service hours .
PERFORMANCE LEVELS PERFORMANCE LEVELS
Carry out a test run with rated load. Carry out a test run with rated load.
General lubricate General lubricate
Lubricate the truck Lubricate the truck
STEERING
STEERING
Check the steering head bearings, steering play. Check the steering head bearings, steering play.
Check that the tiller return in right position. Check that the tiller return in right position.
If the pallet stacker works in grave condition the maintenance interval marked If the pallet stacker works in grave condition the maintenance interval marked
* *
with the " with the " " symbol must to be made at the least one time at month. " symbol must to be made at the least one time at month.
The warranty time for the traction motor wheel is one year. The warranty time for the traction motor wheel is one year.
ATTENTION: All the check with an maintenance interval between 1000 and ATTENTION: All the check with an maintenance interval between 1000 and
2000 working hours must to be made at the least one time at year. 2000 working hours must to be made at the least one time at year.
Thorough and expert servicing is one of the most important requirements for Thorough and expert servicing is one of the most important requirements for
the safe operation of the industrial truck. the safe operation of the industrial truck.
Failure to perform regular servicing can lead to truck failure and poses a Failure to perform regular servicing can lead to truck failure and poses a
potential hazard to personnel and equipment. potential hazard to personnel and equipment.
The application conditions of an industrial truck have a considerable impact on The application conditions of an industrial truck have a considerable impact on
the wear of the service components. the wear of the service components.
We recommend that a PEGASO customer service adviser carries out an We recommend that a PEGASO customer service adviser carries out an
application analysis on site to work out specific service intervals to prevent application analysis on site to work out specific service intervals to prevent
damage due to wear. damage due to wear.
The service intervals stated are based on single shift operation, of 8 working The service intervals stated are based on single shift operation, of 8 working
hours, under normal operating conditions. They must be reduced accordingly if hours, under normal operating conditions. They must be reduced accordingly if
the truck is to be used in conditions of extreme dust, temperature fluctuations or the truck is to be used in conditions of extreme dust, temperature fluctuations or
multiple shifts. multiple shifts.
During the run-in period – after approx. 100 service hours – the owner must During the run-in period – after approx. 100 service hours – the owner must
check the wheel nuts / bolts and re-tighten if necessary. check the wheel nuts / bolts and re-tighten if necessary.
W12
Maintenance interval Maintenance interval
Maintenance interval Maintenance interval
* *
* *
Maintenance interval Maintenance interval
* *
29 29
350 hours 350 hours
1000 hours 1000 hours
2000 hours 2000 hours
100 hours 100 hours
100 hours 100 hours
100 hours 100 hours
100 hours 100 hours
IT29