Traction Wheel Maintenance; Replacement Of Wheel Ring - Pegasolift W12 Guia Uso Y La Mantenimento

REPLACEMENT OF WHEEL RING

At least once a year it is necessary to control the covering of the polyurethane ring of
the motor wheel, if is necessary to replace it operate as follow :
1) disconnect the start key (reference page 14 "Instruments" no. 1)
2) put the truck on safety supports
3) From the under part of the stacker. Remove the 8 screws with cylindrical head with
hexagon indicated on the figure with (1 )
4) extract the wheel ring (2) from the body of the motor wheel and replace it with a
new one.
5) screw again the screws indicated with (1)
REPLACEMENT
1
2
W12

TRACTION WHEEL MAINTENANCE

2
2
2
Every 500 hours of work is necessary to
control the motor brushes, if they are
exhaust operate as follow:
1) disconnect the start key (reference
page 14 " Instruments" no. 1)
2) open the cover of the brushes (1).
3) raise the resort pushing the brush (3)
and extract with care the brush (4).
4) unscrew the screws for fastening the
elements of the brushes (2)
5) after cleaning with care the area of the
brush-supporting group, introduce the new
brushes checking that the move freely in
their space.
22
2
1
UK22