Maintenance Of The Oleodynamic Power Unit - Pegasolift W12 Guia Uso Y La Mantenimento

MAINTENANCE OF THE OLEODYNAMIC POWER UNIT

MAINTENANCE OF THE OLEODYNAMIC POWER UNIT
Periodically it is necessary to control the level of ole-dynamic power unit which directs Periodically it is necessary to control the level of ole-dynamic power unit which directs
the lifting operations of the lifting group, in order execute the following instructions: the lifting operations of the lifting group, in order execute the following instructions:
1) lower the lifting group at the minimum possible height 1) lower the lifting group at the minimum possible height
2) disconnect the start key (reference page 14 "Instruments" no. 1) 2) disconnect the start key (reference page 14 "Instruments" no. 1)
3) open the electronic components cover 3) open the electronic components cover
4) control the level of the oil in the tank of transparent plastic (part 2) ; if necessary 4) control the level of the oil in the tank of transparent plastic (part 2) ; if necessary
unscrew the tank cap (part 3) and execute the filling up with oil for electro-dynamic unscrew the tank cap (part 3) and execute the filling up with oil for electro-dynamic
circuits with a viscosity ISO VG46 with the help of a long funnel. circuits with a viscosity ISO VG46 with the help of a long funnel.
5) screw again with care the tank cap paying attention to not soil the oil with impurity. 5) screw again with care the tank cap paying attention to not soil the oil with impurity.
6) close the electronic components cover. 6) close the electronic components cover.
EMERGENCY DESCENT OF THE FORK GROUP EMERGENCY DESCENT OF THE FORK GROUP
In case of an electric failure with the load lifted, operate as follows to force the In case of an electric failure with the load lifted, operate as follows to force the
descent of the forks: descent of the forks:
1) Hold down the emergency valve (part 1) until the lifting group begins to descent. 1) Hold down the emergency valve (part 1) until the lifting group begins to descent.
3) Wait until the load arrives at the minimum possible height 3) Wait until the load arrives at the minimum possible height
4) Stop to hold down the emergency valve (part 1). 4) Stop to hold down the emergency valve (part 1).
W12
1 1
3 3
2 2
19 19
UK19