Recover The Mast Clearance - Pegasolift W12 Guia Uso Y La Mantenimento

Tabla de contenido

Publicidad

Forche
Forche
2
2
Periodically control the clearances between the mast and the forks; if they are excessive
Periodically control the clearances between the mast and the forks; if they are excessive
is necessary to regulate the sliding block of the guide group as follows:
is necessary to regulate the sliding block of the guide group as follows:
1. with an hexagon ring wrench, unscrew the security dowel (2)
1. with an hexagon ring wrench, unscrew the security dowel (2)
2- screw the registration dowel (3) until the sliding block (1) comes out recuperating the
2- screw the registration dowel (3) until the sliding block (1) comes out recuperating the
excess clearance;
excess clearance;
3- screw again with care the safety dowel (2).
3- screw again with care the safety dowel (2).
During this operation it is important to avoid decentralization between the fixed mast, the
During this operation it is important to avoid decentralization between the fixed mast, the
mobile mast and the forks; to avoid this it is advisable to make short regulations first on
mobile mast and the forks; to avoid this it is advisable to make short regulations first on
the right side and after on the left side.
the right side and after on the left side.
Pay attention to not excessively brake the sliding between the forks and the masts
Pay attention to not excessively brake the sliding between the forks and the masts
caused to the excessive pressure of the sliding block on the sliding surfaces ; in this case
caused to the excessive pressure of the sliding block on the sliding surfaces ; in this case
increase the clearance unscrewing the regulating element (3).
increase the clearance unscrewing the regulating element (3).
With the "SIMPLEX" lifting system it is possible to execute the clearance regulation only
With the "SIMPLEX" lifting system it is possible to execute the clearance regulation only
on the guide group of the forks (on such stackers the mobile beam does not exist).
on the guide group of the forks (on such stackers the mobile beam does not exist).
DANGER! BECAUSE TO RECOVER THE CLEARANCE IS
DANGER! BECAUSE TO RECOVER THE CLEARANCE IS
NECESSARY TO OPERATE ON MAST WITH LIFTING GROUP
NECESSARY TO OPERATE ON MAST WITH LIFTING GROUP
RISEN, IS OBLIGATORY TO WEAR THE SAFETY HELMET,
RISEN, IS OBLIGATORY TO WEAR THE SAFETY HELMET,
GLOVES AND SAFETY SHOES TO AVOID SERIOUS INJURIES
GLOVES AND SAFETY SHOES TO AVOID SERIOUS INJURIES
AND PERMANENT DAMAGES.
AND PERMANENT DAMAGES.
W12
RECOVER THE MAST CLEARENCE
RECOVER THE MAST CLEARENCE
1
1
3
3
Montante mobile
Montante mobile
20
20
Cassoncino
Cassoncino
UK20

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

W12slg

Tabla de contenido