Castor Wheel Replacement; Cleaning Operation - Pegasolift W12 Guia Uso Y La Mantenimento

2 2
1- the cleaning operations should not be executed with easy inflammable liquids or with 1- the cleaning operations should not be executed with easy inflammable liquids or with
tools from metals able to ruin the stacker body. tools from metals able to ruin the stacker body.
2- during the cleaning operations, all the electric parts should be covered in order to 2- during the cleaning operations, all the electric parts should be covered in order to
avoid corrosion of contacts and short-circuits. avoid corrosion of contacts and short-circuits.
3- it is prohibited to execute the cleaning with water under pressure or with vapor 3- it is prohibited to execute the cleaning with water under pressure or with vapor
4- before use the stacker, check if there are not water stains and that all the circuits are 4- before use the stacker, check if there are not water stains and that all the circuits are
dried up. dried up.
W12

CASTOR WHEEL REPLACEMENT

CASTOR WHEEL REPLACEMENT
Also the castor wheel is subject to wear itself. Also the castor wheel is subject to wear itself.
For replacement is necessary operate as follows: For replacement is necessary operate as follows:
1) disconnect the start key (reference page 13 1) disconnect the start key (reference page 13
"instruments" no. 1). "instruments" no. 1).
2) put the stacker on safe supports 2) put the stacker on safe supports
3) remove the electronic components cover 3) remove the electronic components cover
4) remove the wheel (2) unscrewing the self-locking 4) remove the wheel (2) unscrewing the self-locking
nuts (1). nuts (1).
5) put at its place the new wheel paying attention to 5) put at its place the new wheel paying attention to
the orientation of the fixing flange. the orientation of the fixing flange.
1 1

CLEANING OPERATION

CLEANING OPERATION
21 21
UK21