Bahco TAW Serie Manual De Instrucciones página 14

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 507
TAW AND TAS SERIES
VIEWING AND CLEARING TOOL CYCLE COUNTER
SCR
Each time torque or angle target is reached, tool cycle counter is incremented. Maximum cycle count
is 999999.
1. From target torque or angle screen, press and hold ENTER button for 3 seconds.
2. Highlight CYCLE COUNT menu selection using UP/DOWN buttons.
3. Press ENTER button to display CYCLE COUNT screen.
4. To exit CYCLE COUNT screen without clearing count, press ENTER button while EXIT menu
selection is highlighted.
5. To reset tool cycle count to 0, highlight CLEAR menu selection then press ENTER button.
6. EXIT menu selection is automatically highlighted after count is cleared. Press ENTER button to
return to main menu.
SLIM
STD
VIEWING AND CLEARING TOOL CYCLE COUNTER
Each time torque or angle target is reached, tool cycle counter is incremented. Maximum cycle count
is 999999.
1. From target torque or angle screen, press and hold ENTER button for 3 seconds.
SLIM
2. Highlight CYCLE COUNT menu selection using UP/DOWN buttons.
3. Press ENTER button to display CYCLE COUNT screen.
4. To exit CYCLE COUNT screen without clearing count, press ENTER button while EXIT menu
selection is highlighted.
5. To reset tool cycle count to 0, highlight CLEAR menu selection then press ENTER button.
6. EXIT menu selection is automatically highlighted after count is cleared. Press ENTER button to
return to main menu.
SCR
SCR
SLIM
11

Publicidad

Tabla de contenido
loading

Tabla de contenido