Bahco TAW Serie Manual De Instrucciones página 5

SPECIFICATIONS
WRENCH HEAD TYPES
Ratcheting square drive 48 teeth
9x12, 14x18 & 24x32 receivers for interchange-
able head
SCREWDRIVER (SCR) HEAD TYPES
1/4" male square drive
1/4" female hex earth magnet retention
DISPLAY
• DISPLAY TYPE:
Dot Matrix LCD (192 x 65 Resolution) STD
Dot Matrix LCD (168 x 48 Resolution) SLIM
& SCR
• VIEWING DIRECTION: 6:00
• BACKLIGHT: WHITE (LED)
SEALED BUTTON PAD
POWER - ON/OFF and torque and angle
re-zero
ENTER - measurement mode select and
menu entry
UP – increments torque and angle settings
and menu navigation
DOWN - decrements torque and angle set-
tings and menu navigation
UNITS - units select: ft-lbs, in-lbs, in-oz
(depending on range); kgm, kg-cm, dNm,
cNm (depending on range) and enter PSET
(preset) menu
LCD BACKLIGHT – Illuminates all screens
and last peak torque or angle recall
FUNCTIONS
• Set - torque or angle target
• Track - real time display of torque or accumu-
lated angular rotation with progress lights
• Peak Hold - 5 sec. flashing of peak torque or
alternating peak torque/angle on release of
torque
• Peak Recall - display last peak torque or peak
torque/angle on button press
• Memory - display of last 50 peak torque or
peak torque/angle readings
ACCURACY
• Temperature: 22°C (72°F)
• Angle: (±1% of reading) + (±1º angular
velocity > 10º/sec < 180º/sec) + (±1º of test
fixture)
CW CCW
STD
±2% ±3%
±4% ±6%
Torque:
(unflexed)
±8% ±10% of reading, 5% to 9%
SLIM & SCR CW CCW
±2% ±3%
Torque:
(unflexed) ±4% ±6%
OPERATING TEMPERATURE
0°F - 130°F (-18°C - 54°C)
STORAGE TEMPERATURE
0°F to 130°F (-18°C to 54°C)
MEASUREMENT DRIFT
ANGLE: -0.12 Angular Degrees per Degree C
TORQUE: +0.01% of reading per Degree C
HUMIDITY
Up to 90% non-condensing
BATTERY
SLIM & SCR: Single "AA" Alkaline Cell
STD: Three "AA" Alkaline Cells
Alkaline, Lithium or rechargeable NiMH
batteries exceeds ASME battery life requirement
of 10 hours continuous operation.
DEFAULT AUTO SHUT-OFF
After 2 minutes idle –
(Adjustable, see Advanced Settings)
Static Dissipative (ESD) Properties: Surface
Resistivity 107 - 1010 (only in screwdriver (SCR))
of reading, 20% to 100%
of full scale
of reading, 10% to 19%
of full scale
of full scale
of reading, 20% to 100%
of full scale
of reading, 5% to 19%
of full scale
5