Bahco TAW Serie Manual De Instrucciones página 25

VIBRATOR CONFIGURATION
This function will allow user to configure vibrator for On or Off when target is reached for preference
and/or battery power savings.
1. From Settings menu, use UP
press ENTER button.
2. VIBRATOR CONFIG screen is displayed.
3. Use UP /DOWN
4. Press ENTER button to accept selection and exit to Settings menu.
STD
BATTERY TYPE SELECTION (ONLY ON SLIM & SCR)
This function will allow user to configure the battery discharge thresholds for the type of battery used.
1. From Settings menu, use UP
ENTER button.
2. BATTERY TYPE screen is displayed.
3. Use UP /DOWN
4. Press ENTER button to accept selection and exit to Settings menu.
Note: Tool is configured for Alkaline battery shipped from factory. If Alkaline battery is replaced with
rechargeable Nickel-Metal Hydride (NIMH) or lithium, battery type should be changed so battery level
icon and LOW battery warnings function optimally. Battery life (REPLACE) will not be impacted, how-
ever 50% and Low will be optimized to show most accurate linear discharge time.
/DOWN buttons to highlight VIBRATOR CONFIG selection, then
buttons to toggle ON or OFF selection.
/DOWN buttons to highlight BATTERY TYPE selection then press
buttons to select the type of battery being used.
SLIM/SCR
25