REAR SUPPORT
Push the stand feet to the rear support ends and attach
the rear support to the main frame with two bolts,
washers and locking sleeves.
FRONT FRAME TUBE
Remove the rubber band from around meter cable
coming from the frame tube.
4
All manuals and user guides at all-guides.com
1.
Adjust the resistance knob to position
brake wire from the handlebar support tube into the
loop in the upper part of the brake wire outlet from the
frame tube.
2.
Screw the wire ends into each other.
Attach the meter cable to the connector coming from
the front frame tube. Push the front frame tube inside
the frame tube: do not damage the meter cable! Attach
the front frame tube tight to the frame with the washers
and attachment screws.
FOOTRESTS
Attach the footrests to the position of your choice on
the pedal shafts with two screws, two washers / screw
and locking nuts.
ARMS
Push the metal shaft through the bracket housing of
the left arm. Attach now the left arm to the front frame
tube by pushing the metal shaft through the opening in
the tube. Push the right arm on the shaft and lock it by
tightening a large washer, a locking sleeve and a screw to
the both ends of the shaft. Tighten the arms using two
Allen keys.
8
. Steer the