On-Screen Content; Status Messages - JVC BD-X200E Instrucciones

LCD Display and On-Screen Content

On-Screen Content

In addition to E-E and playback screens, the monitor connected to the DVD recorder's VIDEO LINE OUT terminal can display the
following.
● Status messages
● Event messages
● Alarm messages
● The Setup Menu (☞ Page 74)
● Recording-operation control screens: REC CONTROL panel (☞ Page 41)

Status Messages

The DVD recorder's setting condition and operation status are indicated by status messages, and these messages are displayed
on E-E or playback screens.
The DISPLAY MENU screen can be used to indicate whether or not status messages are to be displayed.
DISPLAY MENU screen
DISPLAY MENU
MENU
DISPLAY
TITLE/CHAPTER
RECORDER MODE
TIME/DATE
REMAIN
DATE STYLE
No. Item
1 Operation Mode
E-16
REMOTE CONTROL screen (☞ Page 60)
To display status messages:
Set DISPLAY from the DISPLAY MENU screen to ON.
The various items of status information for display can be selected.
ON
If DISPLAY is set to OFF, no status information will be displayed.
ON
ON
TIME+DATE
ON
DD/MM/YY
Status Messages
FINALIZE
DISC TITLE
04/05/04
11:20:00
This area indicates the DVD recorder's current mode of operation.
Use RECORDER MODE from the DISPLAY MENU screen to indicate whether or not
this is to be displayed.
NO DISC
EJECT
OPE OFF
STOP
REC
REC PAUSE
PLAY
STL
FWD × 3
FWD × 15
REV × 3
REV × 15
SLOW FWD 0.50 : Slow-forward play at 0.5 times normal speed
SLOW FWD 0.06 : Slow-forward play at 0.06 times normal speed
SLOW REV 0.50 : Slow-reverse play at 0.5 times normal speed
SLOW REV 0.06 : Slow-reverse play at 0.06 times normal speed
LOADING
000 min
REC
TITLE 1 0:11:22
CHAPTER 1 0:11:22
Description
: The DVD recorder currently contains no disc.
: The current disc is being ejected.
: Operate Off mode
: Stop mode
: Recording mode
: Recording Pause mode
: Playback mode
: Still mode
: Fast-forward play at 3 times normal speed
: Fast-forward play at 15 times normal speed
: Fast-reverse play at 3 times normal speed
: Fast-reverse play at 15 times normal speed
: A disc is being loaded.
Data relevant to recording:
If the SET UP button is pressed
while in Recording mode, the
video bit-rate setting and the audio
encoding format will be displayed.
If the SET UP button is then
pressed once again,
information is removed from the
screen.
1
this