JVC BD-X200E Instrucciones página 36

Settings & Controls for Recording
Setting the Encoding Format for Audio & Video (continued)
Audio Encoding
AUDIO ENCODE
This parameter is used to set the encoding format for audio data.
LPCM : Linear PCM encoding
DOLBY DIGITAL : Dolby AC3 encoding.
MPEG : MPEG encoding.
Note
If the SET UP button is pressed while in Recording mode, the video bit-rate setting and audio encoding format will be
displayed on-screen. Press the SET UP button once again to hide this information.
Guide to Recording Times
The time available for recording on a disc will depend on the video encoding bit rate and audio encoding format that have been set.
Furthermore, the more titles a disc contains, the less time will be available for recording. Use the following table as a guide to the
amount of time available for recording.
Audio encoding format
DOLBY DIGITAL
MPEG
LPCM
E-34
9 Mbps 8 Mbps
62 min. 69 min.
63 min. 70 min.
— —
Encoding bit rate
7 Mbps 6 Mbps
78 min. 89 min. 105 min.
79 min. 91 min. 108 min.
68 min. 77 min.
5 Mbps 4 Mbps
126 min. 161 min.
131 min. 168 min.
88 min. 103 min.
3 Mbps 2 Mbps
218 min.
231 min.
— —