Recording Operations Using A Dv Camera Trigger - JVC BD-X200E Instrucciones

Recording Operations Using a DV Camera Trigger

By connecting a camera featuring a DV terminal to this DVD recorder, audio and video from the camera can be easily recorded to
a disc. In this type of situation, the DV camera's trigger button is used to control the BD-X200.
Supported cameras: GY-DV5000 and GY-DV5001.
Signal Connections
GY-DV5000
EDITSEARCH
FILTER
1 3200K
2 5600K 1 8 / ND
.3 5600K
.4 5600K 1 64 / ND
SHUTTER STATUS
MENU
AUTO IRIS FULL AUTO BLACK
BACK L
NORMAL
SPOT L
POWER VTR
ON OFF
● Connect the DV IN/OUT terminal on the rear of your BD-X200 to the DV terminal on the GY-DV5000 or GY-DV5001 using a DV
(IEEE1394) cable. One of the commercially-available cables indicated above should be used for this purpose.
● Connect the DVD recorder's VIDEO LINE OUT and AUDIO OUT terminals to the monitor's video in and audio in terminals.
Setup Procedures
● Insert a recordable disc into your BD-X200.
Settings
GY-DV5000 or GY-DV5001 : Set DV REC TRIGGER from the OTHERS MENU (1/2) screen to ON.
BD-X200
REMOTE MENU screen
REMOTE MENU
MENU
REMOTE SELECT
REC CONTROL
REM FF/REW MODE
Procedure
Recording on the BD-X200 will start and stop in response to operation of the trigger button on the GY-DV5000 or GY-DV5001.
* When using, make sure triggers are at least 1 second apart.
TV set or monitor
OPEN
MONITOR
LCD BRIGHT DISPLAY
AUDIO
LEVEL PULL
OPEN
FRONT REAR
LOLUX CH-1 CH-2
CH-1 CH-2
MODE AUDIO INPUT
STRETCH
VTR AUDIO SELECT
NORMAL CH-1 CH-2
COMPRESS CAM AUTO
MANUAL
DV terminal
DV cables:
VC-VDV204 (2 m, 4P-4P) from JVC
VC-VDV206 (2 m, 4P-6P) from JVC
: Set REMOTE SELECT from the REMOTE MENU screen to DV(TRIGGER).
Input will automatically be DV.
● The BD-X200 will adopt Slave mode. (It will not be possible to control recording
operations from the DVD recorder.)
Note
DV(TRIGGER)
Not compatible with the REPLICATION feature of BR-DV6000.
OFF
FF/REW
Rear panel
VIDEO OUT
LAN
(video, audio, and control signals)
AUDIO OUT
VIDEO AUDIO
IN LINE OUT INPUT CH1
LEVEL
IN OUT
4dB
8dB
Y/C
IN
CH2
REMOTE
DV IN/OUT
USB
SIGNAL
DC 19V
GND
DV IN/OUT terminal
E-69