Display Menu Screen - JVC BD-X200E Instrucciones

DISPLAY MENU screen

The following table identifies and describes the parameters that may be set using the DISPLAY screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
Parameter Possible settings
DISPLAY
DISPLY
TITLE/CHAPTER
TITLE
RECORDER
MODE
MODE
TIME/DATE
TIME+DATE
DATE
REMAIN
REMAIN
DATE STYLE YY/MM/DD
MM/DD/YY
[DD/MM/YY]
DSTYLE
MENU
This parameter is used to indicate whether or not status and alarm information is to
OFF
[ON] be displayed on the monitor screen.
OFF : No such data is to be displayed on-screen.
OFF ON : Data is to be displayed on-screen.
When this parameter has been set to ON, the following parameters can be
[ON]
used to indicate which types of status information will be displayed
OFF This parameter is used to indicate whether or not the DVD's title, chapter number,
and elapsed time are to be displayed on-screen during recording and playback.
[ON]
OFF : No such data is to be displayed on-screen.
OFF ON : This data is to be displayed on-screen. Note, however, that nothing will be
[ON] displayed when OFF has been set for the DISPLAY parameter.
This parameter is used to indicate whether or not the DVD recorder's current status
OFF
[ON] is to be displayed on-screen.
OFF : The status is not to be displayed on-screen.
OFF ON : The status is to be displayed on-screen. Note, however, that nothing will be
displayed when OFF has been set for the DISPLAY parameter.
[ON]
[OFF] This parameter is used to indicate whether or not the current date and/or time are to
DATE be displayed on-screen.
TIME OFF
DATE
TIME
[OFF] TIME+DATE : Both date and time are to be displayed.
● When the DVD recorder is stopped or recording, data from the internal clock is
DATE
displayed. When playing a disc, the date and time of disc finalizing are displayed.
TIME
● Even if DATE, TIME, or DATE+TIME have been selected, nothing will be displayed
T+D
when OFF has been set for the DISPLAY parameter.
This parameter is used to indicate whether or not the disc's remaining time (in minutes)
[OFF]
ON is to be displayed on-screen.
OFF : No such data is to be displayed on-screen.
ON : This data is to be displayed on-screen.
● During recording, the remaining space available for recording is displayed (in
minutes).
[OFF] During playback, the time remaining in the current title is displayed.
● Nothing will be displayed when OFF has been set for the DISPLAY parameter.
ON
Note
The remaining space available for recording will depend on factors such as the number
of titles recorded and the data encoding method; accordingly, this value should be
treated as an estimate and not as an exact value.
This parameter is used to select the display style for dates.
YY/MM/DD : Dates are to be displayed in year, month, and day sequence.
MM/DD/YY : Dates are to be displayed in month, day, and year sequence.
DD/MM/YY : Dates are to be displayed in day, month, and year sequence.
YMD
MDY
[DMY]
This button is used to return to the Setup Menu screen.
Description
: No such information is to be displayed on-screen.
: Only the date is to be displayed.
: Only the time is to be displayed.
E-83