Network Menu Screen; Others; Troubleshooting - JVC BD-X200E Instrucciones

NETWORK MENU Screen

The following table identifies and describes the parameters that may be set using the NETWORK MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
Parameter Possible settings
HOST NAME
HOST
IP ADDRESS [192.168.0.2]
IP ADD
SUBNET MASK [255.255.255.0]
SUBNET
DEFAULT [192.168.0.254]
GATEWAY
GATE
MENU

Others

Troubleshooting

Before requesting for repair, please check the following URL:
http://www.jvc-victor.co.jp/english/pro/prodv/
If problem persists, contact either the store where the BD-X200 was purchased or your nearest JVC authorized dealer.
bdx200 This parameter is used to enter the BD-X200's network name using a keyboard.
(Names may be up to 20 characters in length. Alphanumerical characters and hyphen
(-))
This parameter is used to set the IP address. It is important to ensure that no two
devices on a single network share the same IP address.
This parameter is used to set the subnet mask. Connected BD-X200s should have
the same network setting.
This parameter is used to set the gateway address. Connected BD-X200s should
have the same address.
This button is used to return to the Setup Menu screen.
Description
E-85