Led Indicators; Tab. 1: Led Displays Of The Tr4; Tab. 4: Error Displays Of The Status/Diag Led - SICK TR4 Instrucciones De Operación

Operating Instructions
TR4
Tab. 1: LED displays of
the TR4
8014465/2012-05-07
Subject to change without notice
Product description
3.3

LED indicators

The Status/Diag LED signals the operational status of the TR4.
Display Meaning
Off No supply voltage
3 × Green, Power-up sequence
1 × Red
Green
Actuator inside the response range,
safety outputs active,
application diagnostic output Aux inactive
Red Actuator outside the response range,
safety outputs inactive,
application diagnostic output Aux active
Red or Error. See Tab. 4 "Error displays of the Status/Diag
Green LED" in section 8.3 on page 161.
The LED is illuminated constantly.
The LED is flashing.
The LED is off.
For further LED displays see Tab. 3 "Error displays of the Status/Diag
LED on the TR4 Unique Coded during teach-in" on page 155 and
Tab. 4 "Error displays of the Status/Diag LED" on page 161.
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
GB
Chapter 3
141