Chattanooga Intelect Mobile 2 Guia De Inicio Rapido página 29

WAVEFORMS (CONTINUED)
VMS™ FR
The VMS-FR version of the VMS waveform is a physiologically
based channel interaction in which one channel stimulates the
agonist and the other the antagonist of the muscle group that is
being exercised. The agonistic channel initiates the movement
with a brief burst of power, followed by a period of sustained
activity to complete the movement. The antagonistic channel has
a brief burst of power to slow down the initial acceleration of the
agonist, followed by a low output to regulate the movement of the
agonist. The movement is completed by a final burst of activity in
both channels. VMS is a symmetrical biphasic waveform with a 100
μsec interphase interval. Because the pulse is relatively short, the
waveform has a low skin load, making it suitable for applications
requiring high
intensities, such as in muscle re-education protocols.
Output Mode
Available on
Treatment Time
Mode Selection
Output Intensity
Burst Duration
Cycle Time
Frequency
Phase Duration
IRMS
DC component
Advice on size and type of electrodes to be used is given in device GUI
"treatment guidelines" feature
The High Voltage Pulsed Current (HVPC) has a very brief pulse
duration characterized by two distinct peaks delivered at high
voltage. The waveform is monophasic (current flows in one
direction only). The high voltage causes a decreased skin resistance
making the current comfortable and easy to tolerate.
Output Mode
Available on Channels
Treatment Time (Stim)
Treatment Time (Combo)
Mode Selection
Output Intensity
Cycle Time
Electrodes
Display
Channels 1&2
Frequency
1-60 min
Polarity
CC
Ramp
0-140 mA (CC)
Sweep time
200 - 5,000 ms
Sweep High Frequency
TBD
Sweep Low Frequency
20-80 pps
IRMS
30-400 μsec
DC component
0-39mA
No
High Voltage Pulsed Current (HVPC)
E N
Electrodes
1, 2
1-60 Min
1-30 Min
CV
0-500 V (CV)
Continuous or User Defined
Volts
1-200 pps
Positive or Negative
0.5-5 sec
14sec
2-200 pps
1-199 pps
0-45mA
0 - 1.5mA
29