BH FITNESS H106 Manual De Instrucciones página 15

Problem: Display segments of a
function read-out are not visible or
error messages
function appear.
Solution:
a.- Finish the exercise or unplug it
from the 220 V mains socket for 15
seconds and then plug it back in.
b.- If the above steps do not help then
replace the electronic monitor.
Problem: The monitor does not switch
on.
Solution:
a.- Check the 220 V mains connection
b.- Check the output connection from
the transformer to the machine.
Mod. H-106 Transformer 12 V. 1000
mAmp.
c.- Check the cable connections for
the main post.
Problem: "Err M" error message
Solution:
a).- Make sure that all of the sensor
cables are connected to the monitor.
for a particular
b).- Press the UP▲/DOWN▼ keys to
check the motor.
c).-Check that the motor cables are
connected.
d).- If the "ErrM" message persists,
replace the monitor by getting in touch
with the Technical Assistance Service.
Avoid leaving the electronic monitor in
direct sunlight as this might damage
the liquid crystal display. Similarly, do
not expose it to water or knocks.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
Do not hesitate to get touch with us if
you have any queries, by calling:
+44 0844 335 3988
service@bh-uk.co.uk
15