Indications For Use; Principle Of Operation - SybronEndo Apex ID Instrucciones De Uso

• This product is for use by dental professionals only.
• To avoid electrical shock or explosion, keep the device away from high temperature or high humidity. Keep the
metal parts of this product away from conductors. Fire, electric shock, or damage may result.
• Do not put heavy items on the device. Fire or electric shock may result.
• Confirm all measurements of canal length with radiographs.
• Blocked root canals cannot be measured correctly.
• When you give this device to others, include the Instructions For Use.
• Remove the batteries if the Apex ID device is not likely to be used for sometime.
Label maintenance and repair:
• The label for notice or caution shall be maintained soundly with regular inspection.
• Replace: If the label for notice or caution has been lost or damaged, please contact SybronEndo for replacement.
1 – I N DI C AT I O N S FO R U SE AN D PRIN C IP LE OF OPE RATIO N
1.1 – Indications for use
Apex ID is an Electronic Apex Locator designed for use in
measuring the working length of root canals.
NOTICE Use the device to measure the working
length of root canals only.
ose Handle Keep Type B Caution This
f With Dry Applied For Dental Side Up
erly Care Part Use Only
1.2 – Principle of operation
Micro signals consisting of dual frequencies sent from
2 – D E V I C E C ON TENT S AN D F UN C TI ON S
2.1 – Device contents and functions
Contents of product:
Apex ID Unit (1) – Fig 1.1
AAA Alkaline Batteries (3) – Fig 1.2
Stand (1) – Fig 1.3
Lip Hooks (5) – Fig. 1.4
File Holder A (1) – Fig 1.5
2.2 – Accessories and their functions
Name
Probe cord – Fig 1.8
Lip Hook – Fig 1.4
File holder A – Fig 1.5
File holder B – Fig 1.6
Checker – Fig 1.9
5
077-0167_RevE_Apex_ID_IFU.indb 5-6
Temperature
Consult Dispose Handle
0120
Instructions Of With
-20C to 50C
For Use Properly Care
Humidity
5% to 90%
12
Rx ONLY
Stack 12
Maximum
12
NOTICE
Rx ONLY
Keep Type B Caution This Stack 12
Dry Applied For Dental Side Up Maximum
Part Use Only
the unit return to the unit after travelling along the electric
circuit that is composed of: unit - probe cord – file holder -
file - patient - lip holder - probe cord. The impedance of the
electric circuit may be changed depending on the distance
between the end of a file and the apex of the root canal,
which results in a change in the micro signals that are
input back into the unit. The microprocessor of the unit
calculates the change in micro signals to convert the
difference into a distance value, which will be displayed
on the Apex ID LCD display.
File Holder B (2) – Fig 1.6
Instructions For Use (1) – Fig 1.7
Probe Cord (1) – Fig 1.8
Checker (1) – Fig 1.9
Functions
Connects between the Apex ID & file holder & Lip Hook
For contact to patient's lip
Touch to file (designed for molar teeth)
Holds File
Confirms that the Apex ID is functioning correctly