Introduction; Product Description; Indications For Use - Stryker M-1 Manual Del Usuario

English
This manual assists you with the operation or maintenance of your Stryker product. Read this manual before operating
EN
or maintaining this product. Set methods and procedures to educate and train your staff on the safe operation or
maintenance of this product.
CAUTION
• Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in
this manual.
• Do not modify the product or any components of the product. Modifying the product can cause unpredictable
operation resulting in injury to patient or operator. Modifying the product also voids its warranty.
Notes
• This manual is a permanent part of the product and should remain with the product even if the product is sold.
• Stryker continually seeks advancements in product design and quality. This manual contains the most current
product information available at the time of printing. There may be minor discrepancies between your product and
this manual. If you have any questions, contact Stryker Customer Service or Technical Support at 1-800-327-0770.

Product description

The Stryker Model 6100 M-1® Roll-In System is a manual ambulance cot. The platform on a wheeled frame supports
and transports a maximum weight of 500 lb (227 kg). The product is for use in pre-hospital and hospital environments.
The product is collapsible for use in emergency vehicles. The removable litter and patented Steer-Lock System™
provide enhanced maneuverability. To assist with patient transport, the product features:
• Lift handles at four corners
• Patient restraint straps
• Adjustable pneumatic backrest
• Optional accessories
For maximum patient comfort, you can select from one of three different litter positions, including:
• Shock
• Flat leg
• Optional Gatch

Indications for use

The Stryker Model 6100 M-1® Roll-In System is a non-powered, wheeled stretcher. The product supports and
transports the entire body of a traumatized, ambulatory or non-ambulatory human patient (including infants and adults).
In emergency or transport vehicles, the product:
• Supports patients in a supine (horizontal) or sitting position
• Facilitates the transportation of associated medical equipment (for example, oxygen bottles, or IV bags)
This product is for use in pre-hospital and hospital environments. You can use the product for emergency and non-
emergency applications. The maximum weight capacity is 500 lb (227 kg), which is the sum of the patient, mattress, and
accessory weight. Intended operators of the product include:
• Trained professionals
• Emergency medical service
• Medical care center personnel
• Medical first responders
Ambulance cots are for transportation purposes. They are not intended for extended stay or for use as hospital beds.
They are also not intended for use in devices that change air pressure, such as hyperbaric chambers.
1-6

Introduction

6100-109-005 REV B www.stryker.com