Raising Or Lowering The Optional Knee Gatch; Applying Or Releasing A Wheel Lock - Stryker M-1 Manual Del Usuario

Ocultar thumbs Ver también para M-1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 169
Raising or lowering the footrest (Continued)
To raise the footrest, lift the frame as high as possible. The support bracket automatically secures the frame when you
release the footrest.
To lower the footrest, lift the frame and lift up on the footrest release handle until the frame releases the support
bracket. Lower the footrest until it lays flat.

Raising or lowering the optional knee gatch

To raise the optional knee gatch:
1.
Lift either of the red lifting loops (A) until the knee gatch is in the highest position
2.
Lower the knee gatch to secure the support bracket to the locking mechanism.
3.
Make sure that the locking mechanism is secure before you release the lifting loop.
To lower the knee gatch, lift either of the red lifting loops (A) to relieve pressure on the locking mechanism, and while
holding the loop, push on the red footrest release handle (B) until the support bracket is released. Lower the knee gatch
until it lays flat.
To raise the knee gatch in trend, lift the footrest frame (C) as high as possible until the frame locks into place. The
support bracket automatically connects when you release the frame.
To lower the knee gatch in trend, lift the footrest frame (C), and while holding the frame, lift up on the red footrest
release handle (B) until the frame releases the support bracket. Lower the footrest until it lays flat.

Applying or releasing a wheel lock

WARNING
Do not apply a wheel lock when a patient is on the product or when you move the product to avoid the risk of tipping.
Do not install or apply a wheel lock on a product with worn wheels that are less than 6 in. diameter.
Do not leave a patient or occupant unattended. Hold the product while a patient or occupant is on the product.
To apply a wheel lock, press down on the pedal until it stops and is resting against the surface of the wheel.
To release a wheel lock, press down on the top of the pedal with your foot or lift up on the pedal with your toe. The top
of the pedal will rest against the caster frame when you release the wheel lock.
www.stryker.com
Operation
A
B
C
Figure 1-6: Gatch
6100-109-005 REV B
(Figure 1-6 on page
1-19).
English
EN
1-19

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

6100

Tabla de contenido