Empty Magazine - Prebena PKT-2-J50 SD Manual De Instrucciones Original

Empty magazine

Remove the unused fasteners from the magazine when you are no
longer going to use the tool.
Proceed as follows:
 Open the magazine (see page 26).
 Push the remaining fasteners in the magazine to the right out of
the loading section (2).
 Remove the remaining fasteners from the magazine (1).
 Close the magazine (see page 28).
WARNING
Inadvertent firing during emptying of the
magazine can result in serious or even fatal
injuries.
 Disconnect the tool from the compressed
air supply (see page 40).
After use
41