Check Condition - Prebena PKT-2-J50 SD Manual De Instrucciones Original

Check condition

 Check in particular the following points:
-
All parts of the tool and all accessories must be securely
attached.
-
The safety devices must not be blocked or otherwise impaired
in their function.
-
The spring of the firing protection device must not be
damaged.
-
No parts of the tool or the accessories may show visible signs
of damage, such as scratches or dents.
-
The air hose must be undamaged.
 Scratches in the paintwork of the housing or magazine are not
"damage".
 Do not connect a damaged tool to a compressed air supply.
 Have a damaged tool repaired by qualified personnel before
putting it into operation.
WARNING
Risk of injury when using a damaged tool or if
accessories are not correctly attached.
 Check the condition of the tool before
every use.
 Always ensure that the tool is in a safe
working condition.
Preparing the tool
17