Prebena PKT-2-J50 SD Manual De Instrucciones Original página 82

Preparing the tool
Connecting the compressed air cartridge
 Check the condition of the tool (see page 17).
 Remove the protective cap from the connecting thread of the
compressed air cartridge.
 Check the fitting (3) and the connecting thread of the compressed
air cartridge (2) for foreign matter and soiling.
 Clean the fitting and connecting thread, if necessary.
 Push the compressed air cartridge into the holder (1).
 Screw the thread of the compressed air cartridge (2) finger-tight
into the thread of fitting (3).
20
WARNING
Inadvertent firing during connection to the
compressed air supply can result in serious or
even fatal injuries.
 Never direct the tool towards yourself,
other people or animals.
 Empty the magazine before connecting
(see page 41).