Transporting - Prebena PKT-2-J50 SD Manual De Instrucciones Original

Transporting

The method of transport differs, depending on whether you have to
transport the tool over long or short distances.
Transport over short distances
Short distances are distances of not more than 10 metres.
 Disconnect the tool from the pressure supply (see page 40).
CAUTION
Banging or dropping can result in damage to the tool.
 Do not drop the tool.
 Protect the tool to prevent it banging against any obstacles.
 Carry the tool at the handle with the tool nose facing towards the
ground.
 Reconnect the compressed air supply only when you reach the
new working location.
WARNING
Inadvertent firing can result in serious or even
fatal injuries.
 Always disconnect the tool from the
compressed air supply before transport
(see page 40).
 Carry the tool only at the handle.
 Do not touch the trigger lever during
transport.
Transporting and storing the tool
43