Installation Precautions; Side View - Pioneer PDP-5080XA Manual De Instrucciones

Safety precautions

Installation precautions

Observe the following precautions when installing with any items
such as the optional stand.
When using the optional stand, brackets, or equivalent
items
• Ask your dealer to perform the installation.
• Be sure to use the supplied bolts.
• For details, see the instruction manual that comes with the
optional stand (or equivalent items).
When using other items
• Consult your dealer.
• The following six mounting holes can be used for the
installation:
Rear view
(PDP-5080XA)
Mounting holes
Median line
(PDP-4280XA)
Mounting holes
Median line
All manuals and user guides at all-guides.com
• Be sure to use four or more mounting holes symmetrical to the
• Use M8 screws, which go 12 mm to 18 mm in depth from the
• Be careful not to block the ventilation opening at the rear of the
• Be sure to install the plasma television on a flat surface
• The screw holes other than the illustrations on the left are to be
• Do not mount or remove the plasma television to or from the
• It is strongly recommended to use the optional Pioneer
• Pioneer shall not be liable for any personal injury or product

Side view

Mounting holes
Median
line
Mounting holes
Median
line
Caution
vertical and horizontal median lines.
mounting surface of the plasma television. See the side view
shown below.
plasma television.
because it contains glass.
used only for the specified products. Never use them for
mounting non-specified products.
stand, with speakers attached (for PDP-5080XA only).
Note
mounting products.
damage that results from the use of mounting items other than
the optional Pioneer products.
Plasma television
12 mm to 18 mm
Mounting surface
Mounting bracket
(or equivalent)
M8 screw
02
9
En