Making The Hdmi Control Connections - Pioneer PDP-5080XA Manual De Instrucciones

Using the HDMI Control
On-screen control panel
For an AV system
HDMI Control
5
   
1 6
SURROUND+
2 7
INPUT- INPUT+
3
SURROUND-
4
HDMI CONTROL HDMI CONTROL Exit
Press  or  on the remote control unit of the plasma television to
switch the surround mode in order or in reverse order,  or  to
switch the input source in order or in reverse order. Pressing HDMI
CONTROL turns the control panel screen off to return to the HDMI
Control menu.
Note
• You cannot operate the recorder/player when you press  or 
to switch the input source during operation. To resume the
operation, return to the HDMI Control menu and select the
desired function again.
For a recorder
HDMI Control
5
   
1 6
2 7
3
4
HDMI CONTROL HDMI CONTROL Exit
Press  or  on the remote control unit of the plasma television
to select fast reverse or fast forward mode,  to skip commercials
or  to stop playback. Pressing ENTER starts playback and HDMI
CONTROL turns the control panel screen off to return to the HDMI
Control menu.
For a player
HDMI Control
5
   
1 6
MENU
2 7
3
4
HDMI CONTROL HDMI CONTROL Exit
Press  or  on the remote control unit of the plasma television to
select fast reverse or fast forward mode,  to display the DVD disc
menu or Blu-ray disc's pop-up menu on the player or  to stop
playback. Pressing ENTER starts playback and HDMI CONTROL turns
the control panel screen off to return to the HDMI Control menu.
All manuals and user guides at all-guides.com
1 Switches the surround mode in
order
2 Switches the input source in
reverse order
3 Switches the surround mode in
reverse order
4 Closes the screen to return to the
HDMI Control menu
5 Displays the model number of the
connected device
6 Void
7 Switches the input source in
order
1 Skips commercials
2 Fast reverse
3 Stops playback
Closes the screen to return to the
4
HDMI Control menu
Displays the model number of the
5
connected device
6 Starts playback
7 Fast forward
1 Displays the DVD disc menu or
Blu-ray disc's pop-up menu on
the player
Fast reverse
2
3 Stops playback
4 Closes the screen to return to the
HDMI Control menu
5 Displays the model number of the
connected device
6 Starts playback
7 Fast forward

Making the HDMI Control connections

When you make changes in connections between the plasma
television and the device(s) that supports the HDMI Control
functions or settings for the "HDMI Control Setting", perform the
following procedure:
1 Turn on the plasma television and all the connected devices.
2 Confirm that the setting in "Input Setting" for "HDMI Control
Setting" is properly entered according to the connected devices. Also
confirm the setting in the "HDMI Control" menu for the connected
devices.
3 Switch to the HDMI input terminals to which the devices are
connected to check if audio and video images are properly output and
displayed.
4 Try turning off the plasma television, then turn the power back on to
the plasma television.
Connecting an AV amp/DVD recorder/BD player
Rear view
Stereo
audio cable
AV amp
HDMI compliant cable
(HDMI cable having the
HDMI mark)
DVD recorder
The PDP-5080XA/PDP-4280XA does not support S/PDIF. When
connecting the plasma television to an AV system, use the
analogue AUDIO OUT terminal.
HDMI compliant cable
(HDMI cable having the
HDMI mark)
BD player
11
49
En