Auto Installation - Pioneer PDP-5080XA Manual De Instrucciones

Using with other equipment
When using the INPUT 4 HDMI terminal:
Rear view
HDMI device
Activating the HDMI terminal
When you use the INPUT 1 or INPUT 3 HDMI terminal, select the
terminal for the desired input source, then perform the following
procedure to activate the terminal.
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "HDMI Input" (/ then ENTER).
4 Select "Setting" (/ then ENTER).
5 Select "Enable" (/ then ENTER).
Item Description
Disable (default) Deactivates the HDMI terminal
Enable
Activates the HDMI terminal
6 Press HOME MENU to exit the menu.
Specifying the type of input signals
1 Repeat steps 1 to 3 provided for Activating the HDMI terminal.
2 Select "Signal Type" (/ then ENTER).
3 Select "Video" or "PC" (/ then ENTER).
All manuals and user guides at all-guides.com
Item
Video (default)
PC
4
• Make sure to select "PC" when a PC is connected to the HDMI
HDMI compliant cable
• In the "Video" mode, the image is "over-scanned" (enlarged),
(HDMI cable having the
HDMI mark)
• In the "PC" mode, the image is displayed in full size for optimum
Specifying the type of digital video signals
1
2
3
• If you select "Auto", an attempt will be made to identify the type
Item
Auto (default)
Colour-1
Colour-2
Colour-3
Colour-4
4
Description
Select this option except when a PC is
connected
Select this option when a PC is connected to
the HDMI input terminal
Press HOME MENU to exit the menu.
Caution
input terminal.
Note
and the mode is automatically switched to "PC" when PC
signals are received.
image quality.
when "Video" is selected
("overscan" size screen)
Repeat steps 1 to 3 provided for Activating the HDMI terminal.
Select "Video" (/ then ENTER).
Select the type of digital video signals (/ then ENTER).
of digital video signals when digital video signals are received.
Description
Automatically identifies input digital video
signals
Digital Component Video signals (4:2:2) locked
Digital Component Video signals (4:4:4) locked
Digital RGB signals (16 to 235) locked
Digital RGB signals (0 to 255) locked
Press HOME MENU to exit the menu.
10
when "PC" is selected
("underscan" size screen)
45
En