Pioneer PDP-5080XA Manual De Instrucciones página 50

11 Using the HDMI Control
Connecting a DVD recorder
Rear view
Note
• Maximum number of devices that can be connected and
controlled using the remote control unit of the plasma television
is as follows: recorder x 2, player x 2, AV system or HD AV
Converter x 1.
• When connecting an AV system or HD AV Converter, be sure to
place and connect it between the plasma television and
recorder or player.
• Do not connect an AV system that does not support the HDMI
Control functions between the plasma television and a recorder/
player, otherwise the HDMI Control functions may not operate
properly.
50
En
All manuals and user guides at all-guides.com
HDMI compliant cable
(HDMI cable having the
HDMI mark)
DVD recorder
• When connecting an AV system that does not support the HDMI
Control functions and a player/recorder that supports the HDMI
Control functions to the plasma television, connect the AV
system to the AUDIO OUT terminal on the plasma television
using a stereo audio cable, and the recorder/player to the HDMI
terminal using an HDMI compliant cable (see the illustration
below).
Rear view
Stereo HDMI compliant cable
audio cable (HDMI cable having the
HDMI mark)
AV amp
• After making connections, enter the setting in "Input Setting"
for "HDMI Control Setting". Be sure that the setting is entered
in each HDMI input terminal to which the device is connected.
• You cannot connect and use an AV system and HD AV Converter
at a time.
• Settings in the connected device(s) are also required to use the
HDMI Control functions. For details, see the operation manual
that came with the connected device(s).
• When a recorder is connected, its power is automatically
switched on as the plasma television is turned On to help make
the recording smoother.
• For more information on the devices that support the HDMI
Control functions, check the Pioneer Web site (see cover).
DVD recorder