Generator Metering Menu - Kohler 14/20RESA Funcionamiento

3.11 Generator Metering Menu

The generator metering menu displays the generator
voltage and frequency. See Figure 3-12.
Generator ---->
Metering
Three-phase
Volts L1--L2:
Volts L2--L3:
Volts L3--L1:
Frequency:
Figure 3-12 Generator Metering Menu
TP-6804 1/15
Single-phase
Volts:
240 V
Frequency:
240 V 60.0 Hz
240 V
60.0 Hz
Reset
Calibration
<---- Return
Voltage Calibration
Hazardous voltage.
Will cause severe injury or death.
This equipment must be installed and
serviced
personnel.
The voltage calibration mode can be entered from the
Generator Metering
Kohler-authorized distributor/dealerdealer for service.
The Reset Calibration menu allows you to set the
voltage reading back to the original value after
calibration, if necessary. See Figure 3-12.
Note: Actual settings may vary.
240 V
Reset
Calib? No
Reset
Calib? Yes
DANGER
by qualified electrical
menu. Contact
Section 3 RDC2 Controller Operation
a
tp6810
41